FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

4167 questions

4739 answers

3460 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
346 views
in Vehicle tracking by anonymous

How can I set up the FMB130 DIN1/ DIN2 port, to count the reed switch contact number?

How to set up an I/O interface with an example.

I use FMB130 FW 03.27.13 Rev:03

1 Answer

+1 vote
by anonymous

Hello, 

Good day.

I will suggest connecting to DIN 1/DIN 2 instead. So, in the Configurator, you will need to enable the Pulse Counter DIN1 or DIN2 depending on which is used. DIN gives 0 and 1, so in a sense, the change between 0 and 1 is a pulse. We have separate IO elements which count those pulses. follow the image below for the I/O settings that need to be enabled in the Configurator.

https://wiki.teltonika-gps.com/view/Impulse_counter

Kind regards.

Best answer
by anonymous
Hello,

Thanks for your answer.
I tested, and the setting is working properly.

Have a nice day.