subscribe to our Youtube
How can I set up the FMB130 DIN1/ DIN2 port, to count the reed switch contact number?
How to set up an I/O interface with an example.
I use FMB130 FW 03.27.13 Rev:03
I will suggest connecting to DIN 1/DIN 2 instead. So, in the Configurator, you will need to enable the Pulse Counter DIN1 or DIN2 depending on which is used. DIN gives 0 and 1, so in a sense, the change between 0 and 1 is a pulse. We have separate IO elements which count those pulses. follow the image below for the I/O settings that need to be enabled in the Configurator.