subscribe to our Youtube

Ask a question

3952 questions

4498 answers


50491 members

Ask a question
0 votes
in Vehicle tracking by
I see in the wiring schema of the FMC640 that it have 2 x CAN

Can I use these to read data from a VW GOLF Sportsvan from 2015

If I need a ALL-CAM300 how must I connect the unit to the FMC640

I don't see input 5/6 for tx/rx like the FMC130

1 Answer

0 votes
Hello Matisoft,

Good day. Thank you for your question.

Please refer here for the connection of CAN adapters to FMC640 -

Instead of using input 5/6 as in FMX1 devices, you will need to use a Mini (B) USB and connect from the ALLCAN300 to FMC640.

As for the scheme, please check if your vehicle is supported, here -

To acquire the scheme, kindly reach out to us via VIP Helpdesk or contact your Sales Manager/Distributor. If you don't have any contacts with our Sales managers, please contact them on our official website and click on the "Contact Us" button. When you will click, please fill out the form and submit it.

Note: as a topic, please choose "Vehicle telematics" or you can send an e-mail with the description of your situation to

Thank you in advance.

Kind regards.

Hi, Vivek

I will also try the integration between FMC640 and ALL-CAN300,

my question: if mini USB is used by ALL-CAN300, how can we connect FMC640 to computer to monitor data?

So far my plan is to use bluetooth to connect FMC640 to my computer, but I haven't been able to scan the fmc640's bluetooth yet.

What do you think?

Thank you in advance.

Have you tried to read the can-bus without all-can300 device?

Connect FMC640 CAN-H and CAN-L to OBD connector of the car pin 6 (CAN-H) and pin 14 (CAN-L) and see on the configurator software if you get canbus parameters.