WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

4167 questions

4739 answers

3460 comments

0 members

Most popular tags

fmb920 fmb120 configurator fmb640 sms-commands firmware fmb125 fmb001 configuration unlock-code fmb204 bluetooth canbus fmb140 fota-web fmc640 fmc130 firmware-upgrade fmb130 sms
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

22206: Do i need a ALL-CAM300 on a FMC640 to read data from a VW Golf Sportsvan.

0 votes
370 views
in Vehicle tracking by anonymous
I see in the wiring schema of the FMC640 that it have 2 x CAN

Can I use these to read data from a VW GOLF Sportsvan from 2015

If I need a ALL-CAM300 how must I connect the unit to the FMC640

I don't see input 5/6 for tx/rx like the FMC130

1 Answer

0 votes
by anonymous
Hello Matisoft,

Good day. Thank you for your question.

Please refer here for the connection of CAN adapters to FMC640 - https://wiki.teltonika-gps.com/view/FMC640_CAN_adapters#Installing_LV-CAN200.2FALL-CAN300.2FCAN-CONTROL

Instead of using input 5/6 as in FMX1 devices, you will need to use a Mini (B) USB and connect from the ALLCAN300 to FMC640.

As for the scheme, please check if your vehicle is supported, here - https://wiki.teltonika-gps.com/view/ALL-CAN300#Supported_vehicles_list

To acquire the scheme, kindly reach out to us via VIP Helpdesk or contact your Sales Manager/Distributor. If you don't have any contacts with our Sales managers, please contact them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill out the form and submit it.

Note: as a topic, please choose "Vehicle telematics" or you can send an e-mail with the description of your situation to info@teltonika.lt

Thank you in advance.

Kind regards.
by anonymous

Hi, Vivek

I will also try the integration between FMC640 and ALL-CAN300,

my question: if mini USB is used by ALL-CAN300, how can we connect FMC640 to computer to monitor data?

So far my plan is to use bluetooth to connect FMC640 to my computer, but I haven't been able to scan the fmc640's bluetooth yet.

What do you think?

Thank you in advance.

by anonymous
Have you tried to read the can-bus without all-can300 device?

Connect FMC640 CAN-H and CAN-L to OBD connector of the car pin 6 (CAN-H) and pin 14 (CAN-L) and see on the configurator software if you get canbus parameters.