Hello sc2610j,
Good day. Thank you for the question.
Please find the answers below:
1) What is the term ELA T x0.01 from ELA T?
The difference between these 2 is the multiplier of the temperature readings. If it is ELA T x0.01, then the multiplier is 0.01 and if it is ELA T then the multiplier is 1. However, these preset and can be changed as desired.
2) What settings do I need to make to read the battery status and RSSI range between the ELA T sensor and FMB130?
(the temperature value shows me correctly)
May I know if you are referring to the battery status of the ELA T sensor? If yes, then you may use the mobile application called nRF and check the frame specification. However, the battery level will only be visible when it drops below 15%. BLE Custom is used for sensors that are not specified in the I/O settings but can be connected to the device via BLE.
Regarding the RSSI range, you may use the same mobile application (nRF Connect) to check and for change of settings you may use the mobile application Device Manager Mobile.
Kindly let me know if you need further clarification on this.
Best regards.