FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE
Ask a question

3723 questions

4243 answers

3160 comments

40690 members

Ask a question
0 votes
348 views
in Vehicle tracking by

Hello,

Configuration FMB010 : Firmware : FMB.Ver.03.25.15.Rev.32

image

When Beacon is activated, packet receive :

00010181001711210102030405060708090a0b0c0d0e0f1000ff00ffc3

0181 = Element I/O ID : 385

0017 = Length of Beacon I/O element

11 = 1 Record out of 1 Beacon Record

21 = 0010 0001

Bit 5 – BLE beacon type : 0 – Eddystone; 1 - iBeacon

Bit 0 – signal strength 0/1

iBeacon

UUID  :0102030405060708090a0b0c0d0e0f10

MAJOR :00ff

MINOR :00ff

RSSI  :c3 

The Beacon stay ON, but here are the received recordings (every 60 second):

00010181000111

Nota : When the Beacon is OFF the same packet is sent.

My question : Is it possible for the FMB010 to send the full frame as long as the beacon is active?

Thank you

1 Answer

0 votes
by

Hello,

Please update your Bluetooth 4.0 settings as it is showed below:

Secondly, please set your beacon's advertising/sending/emitting (however it is called for your beacon) interval to 4-5s.

After changing these settings, you should start to receive full frame as long as the beacon is active.

Let me know if that helps.

Best regards.

by
Hello,

Now i receive the full frames.

Thank you.