Question

FMB001 cannot connect to Nissan Cars (built in Japan) works on other non-nissan cars I have tested. Any workaround to select protocol as suggested in the article linked. https://cutt.ly/AT3ZrB

Answer 1

Hello,

Thank you for your question,

FMB001 can be connected to read CAN data from the vehicles that support following protocols:

1. SAE J1850 PWM (41.6 kbaud);
2. SAE J1850 VPW (10.4 kbaud);
3. ISO 9141-2 (5 baud init, 10.4 kbaud);
4. ISO 14230-4 KWP (5 baud init, 10.4 kbaud);
5. ISO 14230-4 KWP (fast init, 10.4 kbaud);
6. 15765-4 CAN (11 bit ID, 500 kbaud);
7. ISO 15765-4 CAN (29 bit ID, 500 kbaud);
8. ISO 15765-4 CAN (11 bit ID, 250 kbaud);
9. ISO 15765-4 CAN (29 bit ID, 250 kbaud).

Other protocols used in different vehicles are not supported.

Regards.