FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

4167 questions

4739 answers

3460 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
2,255 views
in Vehicle tracking by
Hi,

I have FM920 with SD card and GPSgate Server, the device collect data but have in SD old data collected but not sended to server (9Mb aprox.) It's there any way or command to force to send all data from SD?

Thanks

David

1 Answer

0 votes
by anonymous
Hello David,

yes, there is such a command, which initiates all data sending by GPRS to specified target server.

It is flush SMS, you can read about it in our WIKI:

https://wiki.teltonika.lt/index.php?title=FMB_flush
by
Ok, I sent this command, but nothing happen...

It's posible to make via Configurator Software?

Regards.
by anonymous
Have you got the answer to sent SMS command?

In configurator there is an option to save all stored records to file. Then you can upload that file to server if you use Teltonia Tavl server, but Im not sure if there is such an option in GPS Gate.
by
No, I don't have SMS answer, I try with getgps and getrecord commands and not answer.

Thanks
by
First you have to ensure device is able to connect to GSM operator. If device does not answer to even sms commands - it either is not connected to GSM, or it has sms login / sms password - and you are sending commands without those.

Is device able to establish connection to GSM op?

via .modem command @ serial port you can see if it has operator or not.