Question

Hi

I am having problem with lv-can200,and fmb122 tracker.   I connected it on ODB II port (can bus High  on pin 6 and canbus Low on pin 14) but I can not read any data from my Citroen c4 grand Picasso (2018 year). I tested it with  program number   1495  and others for Citroen c4 (1298, 1143, 1193,1451).  I tried both  can1 and can2 inputs on lv-can200.

Sw Version 18-09-20.
It shows only 5 values with green color (door status, program number module id, cng status and oil Level.  Firmware version on FMB122 is 03.18.16 rev:00  and Connection between tracker and lv-can is via inputs 5 and 6.

Best regards

Answer 1

Hello, you need to follow connection scheme instructions suitable for your vehicle which you should get from your sales representative. Did you? Please check this video how it looks for example -  https://youtu.be/V9RTdSy1E8w . Also you could find the information in our Wiki -  https://wiki.teltonika.lt/view/FMB122_CAN_adapters#Installing_CAN_adapter_with_FMB122_device

Comments

Thank you for your support.  I am waiting for detailed connection scheme from my reseler,  as far as I know it should work directly on canbus wires on odb2 port.  I saw video on YouTube and I can confirm I did the same. Today I am going to check lv-can200 on another vehicle (wv)