If your RUT240 router is showing sequential blinking of the three LEDs and you suspect it is related to changes you made, such as adding new MACs in the static lease, here are some steps you can take to troubleshoot and potentially resolve the issue:
1. Power cycle the router: Start by disconnecting the power source from the router. Wait for about 10 seconds and then reconnect the power. This action can often resolve temporary glitches and restore normal operation.
2. Reset the router's configuration: If removing the MAC addresses doesn't resolve the issue, you may need to reset the router's configuration to default settings. This action will erase all custom settings, so make sure to have a backup of your configuration if necessary. Refer to the router's user manual or manufacturer's website for instructions on how to perform a configuration reset.
3. Update the router's firmware: Check if there are any firmware updates available for your RUT240 router. Visit the manufacturer's website and download the latest firmware version for your specific router model. Follow the instructions provided by the manufacturer to upgrade the firmware. Firmware updates often address bugs and compatibility issues, which could help resolve the LED blinking problem.
If you are still experiencing any issues, I recommend reaching out to us via the VIP Helpdesk or contacting your sales manager/distributor for further assistance. If you don't have the contact details of our sales managers, please visit our official website at https://teltonika-networks.com/ and click on the "Contact Us" button. Fill out the form with your information and submit it.
Thank you for your understanding.
Kind regards.
