Question

what is the sms command to immobilize car engine fmb130

Answer 1

Hi,

Good day, if you are using DOUT to control the relay for the immobilizer you can send

To control DOUT1

setdigout 1 - to activate the immobilizer

setdigout 0 - to deactivate the immobilizer

for your reference please check this wiki page: FMB setdigout - Wiki Knowledge Base | Teltonika GPS (teltonika-gps.com)

If you are using CAN-CONTROL you can send the following commands:

lvcanblockengine  - block the engine

lvcanunblockengine - unblock the engine

Wiki page link: FMB SMS/GPRS Commands - Wiki Knowledge Base | Teltonika GPS (teltonika-gps.com)

Best Regards,

Maynard C.