WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

4167 questions

4739 answers

3460 comments

0 members

Most popular tags

fmb920 fmb120 configurator fmb640 sms-commands firmware fmb125 fmb001 configuration unlock-code fmb204 bluetooth canbus fmb140 fota-web fmc640 fmc130 firmware-upgrade fmb130 sms
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

28350: FMC125 + digital fuel probe

0 votes
199 views
in Vehicle tracking by anonymous

Hey, I bought an FMC125 device and a digital fuel probe https://aplisens.pl/cs-27.html, unfortunately I can't properly connect and configure it with the FMC125 device. Can I get some tips on what to connect the digital probe to and how to configure it with the Teltonika configurator?

1 Answer

0 votes
by anonymous
Hello

Good morning

You should know the communication protocol of the manufacturer

and depending on the variant of the probe, you should connect the probe via RS232 or RS485 with our device taking into account the transmission parameters and according to the selected communication mode use the mode - TCP (ASCII/Binary) mode to implement the support of this probe on your side.

details

https://wiki.teltonika-gps.com/view/FMB125_RS-232_and_RS-485#TCP_.28ASCII.2FBinary.29_modes

Example test environment for communication with external devices via RS232/485

https://wiki.teltonika-gps.com/view/FMU126_Testing_RS-232_TCP_link_mode

Best regards