WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

4167 questions

4739 answers

3460 comments

0 members

Most popular tags

fmb920 fmb120 configurator fmb640 sms-commands firmware fmb125 fmb001 configuration unlock-code fmb204 bluetooth canbus fmb140 fota-web fmc640 fmc130 firmware-upgrade fmb130 sms
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

27472: How to setup DIN 2 for Ground sense

+1 vote
606 views
in Vehicle tracking by anonymous
by anonymous
Haii all.. I woulde like to setup DIN 2 for Ground Sense..i already enable code 8 extender and Ground sense but io_2 still got 0 after connect io_2 to ground wire.. Can you advice how to get io_2:1 for this issue..

Thanks..

1 Answer

+1 vote
by anonymous
Hello.

What is your device type and firmware version ?
Best answer
by anonymous
Im use FMB130 and firmware version is 03.27.14,00.. Is it can if use this firmware version??

Thanks Janusz
by anonymous
Im change use GPRS Command is "setparam 135:1" to change the input mode from DIN 2 to Ground sense,but still same.. io_2 still not ok.. I already enable code 8 extender use GPRS command. The result still same.. Is it must be use io_381 for trigger ground sense 0/1?  Please advice.. Thanks..
by anonymous
Hello.

Device must confirm setparam message, have you received confirmation ?

ground sense is sent as avl 381, if ground detected, 381=1, if ground not detected 381=0.

https://wiki.teltonika-gps.com/view/FMB130_Teltonika_Data_Sending_Parameters_ID

Regards
by anonymous
Hello Janusz,

I only received from device (New Value 113:1;135:1;) at Wialon system and its not show at parameter wialon for io_381..please advice..

Thanks Janusz
by anonymous
Then ground sense I/O is not enabled or Wialon is not decoding it.

ground sense I/O should be enabled by setting its priority to low, high or panic. Configuration parameter id is 51690.

setting low priority: setparam 51690:1

setting high priority: setparam 51690:2

setting panic priority: setparam 51690:3

more details about priorities on Teltonika Wiki:

https://wiki.teltonika-gps.com/view/FMB130_I/O_settings
by anonymous
Is it need a other firmware version for enable io_381 and i have recheck at other device FMB130. At configuration io not have Ground sense..
by anonymous
New Value 113:1;135:1 - means that ground sense and codec 8 extended have been enabled.

What is device answer for "readio 381" command ?
by anonymous
Hello janusz,

Ok now.. The readio 318 answered is (IO ID :381 Value:1)..now avl 381 is trigger value 1 and 0.. Now the avl 381 function well.. Thanks a lot Janusz.. You very helpful..

Now avl 381 have record right??
by anonymous
Hello,

Yes, avl 381 should be included in record
by anonymous
Hello,

Ok, if that avl 381 have record,should be ok.. Anyway, thanks a lot Janusz.. You Very helpful.. Thank you..

Kind regard..