Question

Hi!

I'm using a FMC130 with a IButton reader. I have some troubles with reading the tags. They don't show up in my I/O Status when i'm use them.

I have test this on multiple devices and FW versions, now i am using 03.27.13 Rev:54.  The brown wire is connected on to the ground and the white 1-wire data cable is connected on the green cable. I also have tested  multiple readers.

Is there something i'm missing? A checkbox or something?

With kind regards,

Bob Meuldijk

Answer 1

Hello

Could you provide information on which specific 1-Wire accessories you use (producent/model/type):

• 1-wire reader
• iButton

Thank you

Comments

Hi!

I'm using the magnetic IButton and reader, the same as on the website of Teltonika.

---

Hello

We would like to analyze your case, therefore please open ticket in VIP Helpdesk and provide all needed information: device IMEI, firmware version, configuration file. If you don't have VIP Helpdesk login. please contact with your Sales Manager. If you don't have any contacts with our Sale managers, please contact with them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill the form and submit it. Note: as a topic, please choose "Vehicle telematics".
Or you can send an e-mail with description of your situation to info@teltonika.lt

Best Regards