Question

Hello,

I would like to purchase RFID card but my question is :

Is it any difference between RFID 125kHz  and RFID 13.56MHz? 

and on what type of vehicles can I use them?

Answer 1

Hello Egzondibra, 

Good day. Thank you for your question.

If you are referring to using our 1-Wire RFID Reader - https://wiki.teltonika-gps.com/view/1-Wire_RFID_Reader, it supports only the 125kHz frequency standard. However, if you are referring to connecting a different brand of 1-Wire RFID reader then it has to support the DS1990A protocol. There are significant differences between the 125kHz and 13.56MHz readers such as frequency, range, technology, antenna etc.

For example: if you are using a 1-Wire RFID Reader (13.56MHz) as this - https://drexia.pl/en/strona-glowna/61-1w-h0-04p-and-1w-h0-04kp-1356-mhz-rfid-reader.html then the read data are sent via 1-Wire interface, emulating the MAXIM DS1990A (simulating iButton) that our device understands. 

You may use it with any device that supports a 1-Wire interface. A use case scenario can be found here - https://teltonika-gps.com/industries/use-cases/automated-drivers-time-tracking-and-identification/

Hope this helps.

Kind regards.

Comments

Im going to use the 1-wire rfid reader from teltonika, but may I install on all vehicles?