Question

Hi!

We are developing Android software of virtual dashboard to display sensors data onboard in highly configurable manner. At now software is compatible with Navtelecom GPS trackers and Galileosky. We'd like to add Teltonika devices support.

We can get data using serial connection like this

08:32:50.393 [2004.01.01 00:08:58]-[AXL.CLBR] Waiting... (Fix:0 Ign:0)

[2004.01.01 00:08:58]-[DIAG.TOOL] captured packet, r_crc: 0x0220 -> need to process

08:32:50.732 [2004.01.01 00:08:58]-[DIAG.TOOL] received diag tool req id: 0x00000060, cmd id: 0x0022, source: serial, type: regular, data:

DUMP DATA START:

46 4D 42 58 00 00 00 60 00 22 00 00

DUMP DATA END

etc...

but we can't understand how to parse this data. I suppose it is a kind of service log. May be we can set up it to show IO data in constant format? Any suggestions?

Answer 1

Hello.

We would like to analyze your case, therefore please open ticket in VIP Helpdesk and provide all needed information: device IMEI, firmware version, configuration, answer for getver SMS command. If you don't have VIP Helpdesk login. please contact with your Sales Manager. If you don't have any contacts with our Sale managers, please contact with them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill the form and submit it. Note: as a topic, please choose "Vehicle telematics".
Or you can send an e-mail with description of your situation to info@teltonika.lt

Best Regards