Question

Dear sirs

Is it possible to activate any of the digital outputs of a Teltonika tracker  if the values of the parameters read by the OBDII dongle exceed the established limits?

Example: if the RPM reading that the OBDII dongle sends to a FMBXXX exceeds the value previously defined in the I/O parameter list, the device should activate one of the FMBxxx  digital DOUT directly.

Thanks

Answer 1

Hello,

Thank you for your question.

In this case you would need to setup your server to send setdigout commands to your tracking device whenever the RPM exceeds the setup limit.

Please refer to our Wiki page for more information on setdigout commands https://wiki.teltonika-gps.com/view/FMB_setdigout

If you have more questions please reach out to us via VIP Helpdesk or contact your sales manager/distributor. If you don't have any contacts with our Sales managers, please contact them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill the form and submit it.

Best regards.

Answer 2

Thanks for your response