Question

Hello!
 

I am using FMB120 with CAN CONTROL and I have activated Security State Flag P4 parameter in the Teltonika configurator, but the parameter is not received in Wialon. (io_517) Checked the raw data and there is no io_517. State flags like Control state flags io_123 and security state flags io_132 I receive. 

Used firmware 03.27.07.Rev.00

Here is the snapshot of the configurator.

Any ideas?

Answer 1

Hello

Please check if Codec 8 Extended is enabled in device configuration. AVLs with ID above 255 require Codec 8 Extended to be sent.

Regards