Hello.
From the translator:
1. Is it possible not to reset the active output state as long as the iButton key is in the reader? 50000ms is not enough.
2. Is it possible to remotely manage the list of keys? If so, how is this done?
Ad.1: DOUT ON Duration in ID Read Notification scenario is a parameter in miliseconds which defines how long DOUT1/DOUT2 should be active. After connecting of iButton, DOUT will blink for period of time, which configured in DOUT ON Duration parameter, maximum value is 5000ms (5 sec).
Ad.2: Every configuration parameter can be changed with setparam SMS/GPRS command:
https://wiki.teltonika-gps.com/view/FMB125_SMS/GPRS_Commands
iButton Authorized ID List parameter is from 30000 to 33999:
https://wiki.teltonika-gps.com/view/FMB125_Parameter_list#iButton_List
For example to set first authorized ID to 025B42A003FBC521 send SMS:
"SMS_login SMS_password setparam 30000:025B42A003FBC521" or if there is no sms login and password set, put two spaces in the begining of the message: " setparam 30000:025B42A003FBC521"
To check parameter value, use getparam command.
Regards