Question

Has anyone in this forum ever tried installing the Can Bus on the Teltonika FMB 640 module on the Scania unit, but by connecting the Can High Can Low Cable to the Scania Unit without additional accessories?

and did it manage to get the data?

Answer 1

Hello.

CAN Low and High wires schould be connected to the vehicle's FMS connector as described on wiki:

https://wiki.teltonika-gps.com/view/FMB640_and_Tachograph_Solution#Remote_Data_Download_.28RDD.29_via_FMS

Note that some vehicles needs to have FMS activated or installed by vehicle manufacturer service.

Regards

Comments

hello

thanks for your feedback,

well noted, 

1. if i use all can and e can, is it the same to join the cable to fms?

2. have you ever taken the can bus data at the scania unit? do you have the documentation?

regards,

---

Hello.

1. if i use all can and e can, is it the same to join the cable to fms? - For ALL-CAN connection manual please open ticket in VIP Helpdesk. If you don't have VIP Helpdesk logins contact your sales manager. If you don't have any contacts with our Sale managers, please contact with them on our official website https://teltonika-gps.com/
and click on the "Contact Us" button. When you will click, please fill the form and submit it.
Note: as a topic, please choose "Vehicle telematics".
Or you can send an e-mail with description of your situation to [email protected]

Best Regards

---

okeyy, thanks for your advice

regards,