Question

I am using an OBD Tracker FMB001 in a Nissan Versa 2018.

I recieve properly information about location in the server, but I have nothing about the OBD data (rpm, fuel level, etc.)

What can I configure in tracker to make available the sending of obd data ?

The car protocol is "CAN 11bit 500kb" that is in the list of compatible protocols of FMB001:

1. SAE J1850 PWM (41.6 kbaud)
2. SAE J1850 VPW (10.4 kbaud)
3. ISO 9141-2 (5 baud init, 10.4 kbaud)
4. ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
5. ISO 14230-4 KWP (fast init, 10.4 kbaud)
6. ISO 15765-4 CAN (11 bit ID, 250 kbaud)
7. ISO 15765-4 CAN (11 bit ID, 500 kbaud)
8. ISO 15765-4 CAN (29 bit ID, 250 kbaud)
9. ISO 15765-4 CAN (29 bit ID, 500 kbaud)

Answer 1

Hi Samuel,

We don't have supported vehicle list for the FMB001 device which means, even the car protocol is supported with FMB001 it does not guarantee to get all the protocols from the OBDII data.

Note: You may try to update the Firmware of your device and check again the available parameters.

Please kindly contact your sales manager for the latest firmware of your device.

Regards

Maynard

Answer 2

The most common reason for getting no OBD code is simply a blown fuse. ... Even a fuse dedicated solely to the car's computer diagnostics can blow for no apparent reason. Check your fuses to see if any have gone bad. Remember that your car or truck might have more than one fuse box.

get-mobdroapk.com

get-vidmateapp.com

Answer 3

nd how can i get minus or zero value of analog input in configurator? becuse i have a analog sensor and connect to it? and configurator does not show full range of value sensor.

https://vidmateapp.win | Shaladarpan