Question

Пожалуйста подскажите как активировать Параметр External Voltage через SMS на FM1100

на команду '  setparam 50080:1'

в ответ "WARNING: Not supported Param ID (50080) or Value detected"

getver - Code Ver:01.26.01 Rev:99 Device IMEI:xxxxxxxxxxxxxxxxx Device ID:000006 Bootloader Ver:01.09 Modem APP Ver:1.04.00

Answer 1

Hello there, 

Good day. Thank you for your question.

The command setparam 50080:1 is used for newer devices whereas FM1100 is an older device which is EOL. For the complete Manual, please refer here - https://teltonika-gps.com/product/fm1100/ at the bottom page

The command used to enable external voltage is setparam 1380 1 (Drive Link > FM1100 Manual > page 89-91)

Please try this and let me know if it helps.

Kind regards.