Question

Hello There, I have FMB920 device and I am trying to use immobilizer functionality. Currently i have tried all SMS commands but not able to operate the relay properly. Kindly guide what command shall i use in order to siwtch off the vehicle right on spot and what if i want to switch off the vehicle when speed is 5?

Answer 1

Hello Nouman, 

Good day. Thank you for your question.

If you are referring to the SMS/GPRS commands to control the DOUT, then please try this command - setdigout. https://wiki.teltonika-gps.com/view/FMB_setdigout and refer to the section "For devices with 1 digital output". Let's say you would like to activate DOUT 1 for 30 seconds when the speed is below 20km/h then the command will be as follows:

With login and password : <login><space><password><space>setdigout 1 30 20

Without login and password : <space><space>setdigout 1 30 20

If you are sending via GPRS then you may skip the login, password, and <space>.

Additionally, please also check on our page on SECO and see if this scenario would suit your use case better - https://teltonika-gps.com/industries/use-cases/secure-vehicle-disabling-system-seco/

Kind regards.

Comments

Yeah, it works.

I have succeeded by trying this.