Question

I have setup my FMB130 to receive a negative input from the vehicle's alarm.

The I/O is setup as shown in the screenshot below.

The problem is that the record sent to the server does not contain the value of the I/O element in the parameters.

"gpslev=15, io113=88, io17=-39, io175=-1, io18=11, io19=992, io236=0, io239=0, io24=0, io247=0, io252=0, io253=0, io66=13002"

Shouldn't there be an "io2=1" when the ground sense is triggered and the record is sent?

Answer 1

Hello

Ground sense AVL id is 381 (codec 8 Extended must be enabled to receive AVL's with id above 255)

https://wiki.teltonika-gps.com/view/FMB130_Teltonika_Data_Sending_Parameters_ID

Please enable Codec 8 Extended in device configuration and check if that parameter is received.

Regards

Comments

Yes, that did the trick.

Many thanks Janusz!