Hello GK,
Good day. Thank you for your question.
Actually, the values are correct but it depends on which bits the values are set. For example, if you receive Byte0 in Security State Flags 3D, 000000000000003D (Example State Flag P4 with Byte0) then you will need to parse 3D into Binary and you will get 00111101. The structure is as follows:
00 - bits 6,7 (are reserved - not used)
11 - bits 4,5 (used for CAN3 state) so the description is CAN3 is not connected, does not need connection
11 - bits 2,3 (used for CAN2 state) so the description is CAN2 is not connected, does not need connection
01 - bits 0,1 (used for CAN1 state) so the description is CAN1 connected, currently data is received
Hope this helps.
Kind regards.