Hello Maksim,
Good day. Thank you for your question.
Please find the answers below:
1) where can I find information about the parameters from the CAN bus (can1-10)? telt 4100 + LV-Can
You can go through the link below from page 64-65 for the CAN parameters (CAN 1 - 9):
https://drive.teltonika.lt/d/7f65a1a9bda64c75b6b4/files/?p=%2FFM4100%20User%20Manual%20v2.18.pdf
2) what is the command to disable the static navigation option? fmb125 or a command to turn off the ignition
You can disable the static navigation by sending the command as below:
If you have set SMS login and password: "login pass setparam 106:0"
If SMS login and password are not set leave two spaces before command: " setparam 106:0"
All SMS commands you can find on our Teltonika Wiki page: https://wiki.teltonika.lt/view/FMB_SMS/GPRS_Commands
For the parameter list you can find it in the link below:
https://wiki.teltonika-gps.com/view/FMB125_Parameter_list
If the issue isn't resolved with the provided information above, then you may contact your Sales Manager/Distributor. If you don't have any contacts with our Sales managers, please contact them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill the form and submit it.
Note: as a topic, please choose "Vehicle telematics" or you can send an e-mail with the description of your situation to info@teltonika.lt
Best regards.