Question

Hi, Everybody.

I would like to send comands to a FMT 100 by my Computer. I can do It by sms but not by my PC. I hace read this link https://wiki.teltonika-gps.com/view/Codec#Codec_12   however I don´t know how can I send these comands using traccar platform. Thank you.

Comments

Thank you Vivet for your help.

I am using a similar platform to Traccar in my own server. When I createa command and I check thebox "send sms"I recibe this message

SMS is not enabled - RuntimeException (BaseProtocol:127 < CommandsManager:66 < CommandResource:71 < ...)

If I don´t check the box then the command is sent but the fmt100 configuration doesn´t change.

I have write en similar Traccar Platfor,: setparam 1000: 123  whithout space and without password, if I send from my mobile, the FMT100 change, is I send It by Traccar then the FMT100 doesn´t change.

Answer 1

Hello Juan,

Good day. Thank you for the question.

May I know if you have tried to generate the Codec12 command without spaces or SMS logins/password from your platform.

Please try this out and let me if it helps.

Kind regards.

Comments

SMS loging/password is disable.

About Codec12, I haven´t generate anything. I don´t know how to command FMT100 from Traccar.

Thnak You

---

Hello there,

Good day. Thank you for your reply.

May I know if you tried checking with Traccar support on how to send the commands to the devices? You may contact them at https://www.traccar.org/support/. 

Once receiving the advice from Traccar, you may send the commands as in the wiki page https://wiki.teltonika-gps.com/view/FMB_SMS/GPRS_Commands but without the <space> and/or login and password.

Kindly try this and let me know if it helps.

Best regards.