Question

Suggest device that monitor construction machinery working time.

Answer 1

Hello

Thank you for this question

There is a parameter Total Engine Worktime, if it is available via CAN bus of the vehicle, then You should be able to receive engine worktime in minutes.

You can verify it on this list.

https://wiki.teltonika-gps.com/wikibase/images/d/d6/ALLCAN300_list_2020_09_08_en.pdf

I would recommend using the FMB 140 in ALLCAN300 MODE

Details

https://teltonika-gps.com/product/fmb140/

Best Regards