Dear,
On the car Skoda Rapid (2017) we installed FM1100 and LV CAN 200. Set up FM1100 device configuration and connect LV CAN 200 parallel to OBD connector in the car (CAN1H to pin 6 and CAN1L to pin 14), set code 391 to LV CAN 200, but we hawe no readings of the device LV CAN 200. Is there anything else necessary to configure to devices FM1100 or LV CAN 200.
Please help me to solve the problem and if You can tell me where i was wrong.
Thank You very much