Question

Hi,

I cano not set the param Movement Source to Ignition. I have this error after clicking to Save to Device :

failed to save configuration : SETPARAM_RESULT does not match

I tried to send sms 'login pass setparam 100:1 but it's not working to.

Could you please help me

Additional informations

FMB920

Used configurator : 1.3.6_C.164

Firmware Version : 03.25.14 Rev:03

Best regards

Comments

I have the same issue with movement source with same error. I am using latest firmware and latest configurator. I am not using any SMS password or log in name, I just use two spaces before the sms text. Thanks. Plus I am still unable to get the 920 to respond with a position when I call it from a phone.

Answer 1

Hello,

Please check this link:https://wiki.teltonika.lt/view/FMB920_System_settings#Multiple_Movement_Sources

Please us parameter ID 138 with firmware 03.25.14 Rev:03 and higher.

Best Regards,

Teltonika Support.

Comments

Hi

I trid with 138, the sms is sent with sucess.

But the configurator is always displaying  100 instead of 138 as param id.

The configurator that not recognizes the 138 param id. There is a conflict : i set via sms the param 138 but in the configurator this param id does not exists ( only 100 : movement source ).

How can i check the result of sms command in this case ?

Best regards

---

Hi,

Resolved afted updating the firmware to 03.25.15.Rev.01.

Thank you very match

Best regards