WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

4167 questions

4739 answers

3460 comments

0 members

Most popular tags

fmb920 fmb120 configurator fmb640 sms-commands firmware fmb125 fmb001 configuration unlock-code fmb204 bluetooth canbus fmb140 fota-web fmc640 fmc130 firmware-upgrade fmb130 sms
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

10967: Ignition signal from voltage in FMT100 does not work

0 votes
773 views
in Vehicle tracking by anonymous

Hi,

I have made following settings for ignition source for my FMT100. So I expect to receive IO[239]=1 when power voltage is i.e. 15V. But FMT100 sends always IO[239]=0 regardless power supply voltage.

Should I do some more settings?

Yannek

1 Answer

+1 vote
by anonymous
Hello yannek,

Thank you for question.

You do not receive IO[239]=1 when power voltage is i.e. 15V because your High Voltage (mV) parameter value is too low than real power voltage. We recommend to change High Voltage (mV) parameter value into higher.

Please let us know if you will have more questions.

Best wishes,

Teltonika Support
Best answer
by
im using fmu130 and fmc130, so, i dont know what is the voltage of the ignition, in the teltonika fm3616, you could select an option "ignition detection" as "automatic" where is this option on fmu130 and fmc130?