Question

Hi! Could you help me please.

I tried to send immobilizer activation command on my FMB125 (setting DOUT1 to high level).

I also set speed thrashold to 10 km/h.

But command had been executed inspite of that speed was 42km/h.

Here is actual command I had sent:

setdigout 1? ? ? 10 10

How can I fix it?

Thanks!

Answer 1

Hello,

Thank you for your question,

The information on FMB125 SMS / GPRS commands can be found here:

https://wiki.teltonika.lt/view/FMB_SMS/GPRS_Commands

Please make sure you follow the description of "setdigout" command:

https://wiki.teltonika.lt/view/FMB_setdigout

Example:

"setdigout 011 30 ? 20 10 30 30" will set DOUT1 to low level for 30 seconds if speed is 10 km/h or lower, DOUT2 to high level for infinite time if speed is 30 km/h or lower and DOUT3 to high level for 20 seconds if speed is 30 km/h or lower.

In your case the command to set up digital outputs will be always received, the digital output 1 will be set to to High level for infinite time when the speed is lower than 10 km/h.

Hope this helps,

Regards.