hi there i have the some problem after upgrading one of my 6 fm5300 devices.(FM5300.01.07.79.Rev.0.e)
after finishing upgrade the device flash rapidly led status, and nothing
no connection with pc nor with usb nor with serial cable!
is ther any solution?
i installed terminal and this is what i get
(20:39:55.498) (>>) [BL]-> Boot Signe is: 55aa<CR><LF>
(20:39:56.080) (>>) [BL]->Read CRC:c0bf Calculated:b6d6<CR><LF>
(20:39:56.267) (>>) [BL]-> No CRC<CR><LF>
(20:39:56.267) (>>) [INIT]-> Invalid Program CRC Detected Wait For Y Modem Connection<CR><LF>
(20:39:56.267) (>>) [INIT FLASH]->Fail. Wrong Manufacturer:[20]<CR><LF>
(20:39:56.267) (>>) ************************************************************<CR><LF>
(20:39:56.267) (>>) <LF> [RESET MNG]-> Windowed Watchdog Reset Detected!<CR><LF>
(20:39:56.267) (>>) ************************************************************<CR><LF>
(20:39:56.267) (>>) [INIT FLASH]-> SPI SERIAL FLASH STATUS REGISTER [00]<CR><LF>
(20:39:56.267) (>>) [INIT FLASH]-> Write Protection Alerday Disabled<CR><LF>
(20:39:56.267) (>>) [BL INIT]-> Bootloader Init Started<CR><LF>
(20:39:56.267) (>>) [BL INIT]-> Bootloader Version: 05.16<CR><LF>
(20:39:56.267) (>>) [BL]-> Boot Signe is: 55aa<CR><LF>
(20:39:56.902) (>>) [BL]->Read CRC:c0bf Calculated:b6d6<CR><LF>
(20:39:56.968) (>>) [BL]-> No CRC<CR><LF>
(20:39:56.968) (>>) [INIT]-> Invalid Program CRC Detected Wait For Y Modem Connection<CR><LF>
(20:39:57.005) (>>) [INIT FLASH]->Fail. Wrong Manufacturer:[20]<CR><LF>
my bootloader seems to be 05.16
somewhere in this forum read that need reflashing not upgrade
is it possible to sent me the fw at alarmskantia@gmail.com in order to fix the problem!
thank you!