WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

4167 questions

4739 answers

3460 comments

0 members

Most popular tags

fmb920 fmb120 configurator fmb640 sms-commands firmware fmb125 fmb001 configuration unlock-code fmb204 bluetooth canbus fmb140 fota-web fmc640 fmc130 firmware-upgrade fmb130 sms
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

8344: FMB120 Battery Level

0 votes
963 views
in Vehicle tracking by

Hello

I setup device to send data of Battery level (%) to Server over TCP. But it doesn't work from some reason on Server side. Just to be clear that device realy send I/O element, can someone show on massage where is that info ? Protocol is 8. In Teltonika manual for FMB AVL ID it is ID 113. Or Protocol 8 Extended must be used for this.

[3.8.2019 12:19:14] (212.200.247.214:20035/Teltonika/tcp) Client: [0x00][0x00][0x00][0x00][0x00][0x00][0x00]x[0x08][0x01][0x00][0x00][0x01]lV[0xFD][0x94][0xB8][0x00][0x0C][0x14][0xA4][0xFD][0x1A]X\[0x82][0x00][0xC8][0x00]j[0x13][0x00]5[0x00][0x19][0x08][0xEF][0x01][0xF0][0x01]P[0x01][0x15][0x05][0xC8][0x00]E[0x01][0x02][0x00]qZ[0x0B][0xB5][0x00][0x09][0xB6][0x00][0x04]B7`[0x18][0x00]5C[0x0F][0xAF]D[0x00][0x00][0x0D][0x03],[0x11][0xFF][0xEE][0x12][0xFF][0xBE][0x13][0xFB][0xD5][0x0F][0x03][0xE8][0x04][0xF1][0x00][0x00]U[0xF3][0xC7][0x00][0x02][0xAB]B[0x10][0x00][0x09][0xA2][0xE9][0x0C][0x00][0x00][0xC6]6[0x02]N[0x00][0x00][0x00][0x00][0x00][0x00][0x00][0x00][0xEE][0x00][0x00][0x00][0x00][0x00][0x00][0x00][0x00][0x01][0x00][0x00][0xC7][0x95]

Thank you

1 Answer

0 votes
by anonymous

Hi, Nemanja.

113 in decimal system is equal to 0x71 in hexadecimal. So there is no such number in your listing.

BTW, what are those strange symbols like [0x01]lV[0xFD]? Maybe we are looking at corrupted message.

by

[4.8.2019 10:30:42] (212.200.247.210:1969/Teltonika/tcp) Client: [0x00][0x00][0x00][0x00][0x00][0x00][0x00]V[0x08][0x01][0x00][0x00][0x01]l[[0xBF][0x85][0xB0][0x00][0x0C][0x1F]6[0xC9][0x1A][0xB3][0x85]}[0x00][0x00][0x00][0x00][0x00][0x00][0x00][0x00][0x14][0x0B][0xEF][0x00][0xF0][0x00]P[0x00][0x15][0x03][0xC8][0x03]E[0x03][0x01][0x00][0xB3][0x00][0x02][0x00][0xB4][0x00]q_[0x07]B1[0xCB]C[0x0F][0xE7]D[0x00][0x00][0x09][0x00][0x83][0x11][0xFF][0x0F][0x12][0xFF][0xE3][0x13][0xFC][0x18][0x02][0xF1][0x00][0x00]U[0xF3][0x10]"[0xB7][0xBC]![0x00][0x01][0x00][0x00][0x95]v

This is massage from Terminal on Server. Codes 8 are used.
Maybe 8 extended must be used for this value (Battery Level) ?

This is setup on FMB120, it send value on every report, how I understand manual.

by

Definetly device don't send data of Battery Level O/I. Or it is wrong ID (113 or hex 0x71) in manual