FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE
Ask a question

3733 questions

4245 answers

3163 comments

40882 members

Ask a question
0 votes
906 views
in Vehicle tracking by
Hello,
I was configuring new device and before making any changes i did firmware update to newest one (3.25.05.Rev.00) using Configurator ver. 1.2.13_C.001. After successful update, device is not visible on my pc using usb cable (It showed in configurator for like 5-10 sec, then it disappeared  without any specific signs).
I am able to send sms commands and getting response, so device seems to work.
Debugging with android device via bluetooth doesn't work - app crashes right after making connection with device.

Is there anything i could do to fix this problem or should i contact my seller and request warranty repair?
by
connect to device via terminal. send .info command.

Please provide what response device prints.

Regards

1 Answer

0 votes
by

I tried again, after i connected device to pc and power supply, device shows in device manager for like 3-5 sec, then dissappear (with name like on photo below). Happening everytime i connect usb cable.


Because of that, i'm not able to connect via terminal. Both status and navigate leds are working without incorrect signs (correct according to manual).

Edit. I was able to connect somehow via terminal and send .info command.
This is what i got:
Code Version:03.25.05
Code Rev:00
IMEI:    358480083988271
HW ver:    FMB010
HW mod:    10
HW volt:2103mV
HW tbl:    2
BL ver:    1.6
BLE:    1
NAND:    0
AXL:    0/KX023

BT ADDR:{00:1E:42:A4:2B:62}

Started:2019-5-22 11:50
Uptime:    0d 0h 30min 28s
PWR rsn:PwrVoltage Cnt:0
Mode:Home on Stop
SpcId:1
UpdRes:-65536


GPS Fix: 0
GPS state: 1
TTFF:     0s
TTLF:     0s
NoFix:     1828s
Latitude :0.0000
Longitude:0.0000
Altitude :0
FW Ver:    AXN_5.10_3333_17041900,0000,,
 

by
Have you tried changing USB cable?

Because device obviously is not continiously restarting -> since it has uptime of ~30 min.

So im suspecting your usb cable is probably not having proper connection.

Also what FMB configurator software version are you using?

Regards