Question

Hi All,

I see the custom scenario features in FMB640 configurator.
In the custom scenario it has DOUT control, is it possible to have the DOUT1 ( for example ) in ON condition, so when the custom scenario event happen, it will switch to OFF for DOUT1.

Kindly inform me.

thank you

Comments

also, from this setting. If this mean that if there is no sim card ( ICCID ) detected then it will activate the DOUT1 ?

kindly infom me

thank you

Answer 1

Hello,

Thank you for your question,

By default D_OUT value is 0 this means that the FMB640 custom scenario feature can only set D_OUT from value 0 to 1.

The custom scenario will follow settings of the operand set up in the I/O settings, for example if you set up "ICCID" element to on change, it will control the D_OUT, when the value changes (for example if the SIM card is removed).

Hope this helps,

Regards, Teltonika Support.

Comments

Hi Support,

thank you for the explanation.
Is there any plan for teltonika to add this feature ( i mean custom scenario ) on FMB120 type in the future ?

Kindly inform me.

thank you