Question

Dear Teltonika,

we have a FMB001, and we like to read the fuel level and distance.

Widt the configurator we have enable this message with low priority.

We receive only this message,

gpslev=0, io175=-1, io236=0, io252=0, io253=0, io31=0, io49=65535, io43=0

we can't understand where is the problem. Coul you help?

Best regards.

Enrico

Answer 1

Hello,

Thank you for your question.

Could you make sure that your vehicle supports following OBDII protocols:

1. SAE J1850 PWM (41.6 kbaud);
2. SAE J1850 VPW (10.4 kbaud);
3. ISO 9141-2 (5 baud init, 10.4 kbaud);
4. ISO 14230-4 KWP (5 baud init, 10.4 kbaud);
5. ISO 14230-4 KWP (fast init, 10.4 kbaud);
6. 15765-4 CAN (11 bit ID, 500 kbaud);
7. ISO 15765-4 CAN (29 bit ID, 500 kbaud);
8. ISO 15765-4 CAN (11 bit ID, 250 kbaud);
9. ISO 15765-4 CAN (29 bit ID, 250 kbaud).

OBDII data is returned to server when Ignition status is: 1

Check if any of OBDII data can be read following this link:

https://wiki.teltonika.lt/view/How_to_check_available_OBDII_data%3F

If you are able to read the data from the device but do not receive the parameters, check if the OBDII parameters enabled, and check if your server is able to correctly parse and read the data sent in AVL packet.

Regards, Teltonika Support.