Question

Is it possible to remote control digital output of FMB120 via TCP form GPSGATE ?

Answer 1

Hello,

Thank you for your question. There is a command "setdigout" which allows you to control and set digital output.

For devices with 2 digital outputs:
Example:
"setdigout 01 30 60" will set DOUT1 to low level for 30 seconds and DOUT2 to high level for 60 seconds. 

Example:
"setdigout 11" will set DOUT1 and DOUT2 to high level for infinite time. 

Example:
"setdigout 11 30" will set DOUT1 to high level for infinite time and DOUT2 to high level for 30 seconds. 

For devices with 1 digital output:
Example:
"setdigout 1 45" will set DOUT1 to high level for 45 seconds.

For more information you can visit Teltonika Wiki page. 

Best regards,

Teltonika

Comments

Try setdigout 1 45 command over GPRS (gps-server), nothing happen in device Output1 (for FMB920)

Also want to know how can control Output1 control over GPRS, if Output work with Relay.

thanks,

---

Hi Hein,

did you solve this issue I'm also using a relay with digital output to 1/0 ignition remotely