Hello,
So i configured OBD II parameters in teltonika configurator (by giving them low/high priority) and fuel level information isn`t send to my server(based on AVL).
Although when i connect diagnosis hardware (from TeXa via ODB) I am able to read fuel level in tank. I`d like to know if is possible to read that data with FMB001, and if so how I can check it (so I can check my other vehicles by myself).
based on this thread i`m posting obdinfo, obdinfo 1, allver outputs.
obdinfo
Prot:9,VIN:N/A,TM:150,CNT:8,ST:IDLE,P1:0xD83A0011,P2:0x1,P3:0x80080000,P4:0x0,MIL:0,DTC:0,ID1,Hdr:18DAF101,Phy:1
obdinfo 1
P1:0xD83A0011,P2:0x1,P3:0x80080000,P4:0x0,C1:0x983A0000,C2:0x0,C3:0x80000,C4:0x0,Hdr:18DAF101,Phy:1,CFG:18DA01F1,v1.3.0
allver
FMB001,03.08.05,00,352094083372745,2018/04/18 09:05,0.5,207kB/346kB,108MB/114MB,TM25Q_R_01.00.03.00_000,2,691,AXN_5.10_3333,0,1,-1
and here is example of parsed data by Traccar server
{"priority":0,"sat":18,"event":0,"ignition":true,"motion":false,"workMode":0,"rssi":5,"io200":0,"gpsStatus":1,"io31":14,"io32":82,"io35":106,"io37":0,"io39":16,"pdop":0.9,"hdop":0.6000000000000001,"power":28.034,"io24":0,"battery":4.022,"io68":0,"io36":720,"distance":0.0,"totalDistance":59055.0,"hours":14263970}
Thanks!