i have a fm1110 device, Sim is not getting the connection, where i checked in phone, it is working.there. The sim also do not have pin,
Here below i am sending the log file, can body tell me, what i am doing wrong.
Terminal log file
Date: 10-9-2018 - 23:42:31
-----------------------------------------------
[2018.09.10 21:42:37]-[SCHED] Simple Tacho debug: Already sent: false, is active: true.
[2018.09.10 21:42:37]-[AppDatSav] Available
[2018.09.10 21:42:37]-[SCHED] lvcan request
[2018.09.10 21:42:37]-[AppDatSav] 2991 seconds before periodic record save
[2018.09.10 21:42:38]-[MODEM] Modem is Initializing (tmo:286)
[2018.09.10 21:42:38]-[MODEM] Registered To Home Network
[2018.09.10 21:42:38]->> +CGREG: 1,"04E4","0376"
[2018.09.10 21:42:40]- [MTX.WDG]->sr:0[1800] fl:0[1800] mod:0[1800] pr:133[1800] ds18:0[1800] lvcan:0[1800]
[2018.09.10 21:42:41]-[AutoGeo] AutoGeofence is disabled
[2018.09.10 21:42:41]-[AppSend] No sending procedure in 604 sec, configured period: 1 sec
[2018.09.10 21:42:44]-[OP.SEARCH] Wait for registration confirmation from CREG
[2018.09.10 21:42:44]-<< AT+COPS=0,2
[2018.09.10 21:42:44]->> ABORTED
[2018.09.10 21:42:45]-[DEBUG]
UARTTxFullCnt: 0
SchTaskRunCnt: 10
UARTTskRunCnt: 991
AppSaveRunCnt: 10
AppSendRunCnt: 10
ValidNMEAPkts: 110
RS232 procesed: 0
RS232 droped : 0
RS485 procesed: 0
RS485 droped : 0
[2018.09.10 21:42:45]-[PERIODIC.BATRAM.INFO]
BootSign : 0x55AA
BootSign Inv: 0xAA55
Date : 2018.09.10
TimeSync : 1
Uptime : 623
Restart Cnt : 0
WDG Restarts: 0
Bad Records : 0
AuthState : 0
GC Timer : 7116
[2018.09.10 21:42:47]-[MODEM] Registered To Home Network
[2018.09.10 21:42:47]->> +CGREG: 1,"04E4","02F4"
[2018.09.10 21:42:47]-[SCHED] Simple Tacho debug: Already sent: false, is active: true.
[2018.09.10 21:42:47]-[SCHED] lvcan request
[2018.09.10 21:42:48]-[MODEM] Modem is Initializing (tmo:285)
[2018.09.10 21:42:51]-[AppSend] No sending procedure in 614 sec, configured period: 1 sec
[2018.09.10 21:42:57]-[SCHED] Simple Tacho debug: Already sent: false, is active: true.
[2018.09.10 21:42:57]-[SCHED] lvcan request
[2018.09.10 21:42:58]-[MODEM] Modem is Initializing (tmo:284)
[2018.09.10 21:42:59]-[OP.SEARCH] Wait for registration confirmation from CREG
[2018.09.10 21:42:59]-<< AT+COPS=0,2
[2018.09.10 21:43:01]-[MODEM] Registered To Home Network
[2018.09.10 21:43:01]->> +CGREG: 1,"04E4","0376"
[2018.09.10 21:43:01]- [MTX.WDG]->sr:0[1800] fl:0[1800] mod:2[1800] pr:154[1800] ds18:0[1800] lvcan:0[1800]
[2018.09.10 21:43:01]-[AppSend] No sending procedure in 624 sec, configured period: 1 sec
[2018.09.10 21:43:07]-[SCHED] Simple Tacho debug: Already sent: false, is active: true.
[2018.09.10 21:43:07]-[SCHED] lvcan request
[2018.09.10 21:43:08]-[MODEM] Modem is Initializing (tmo:283)
[2018.09.10 21:43:09]-[AppSend] Time left before Periodic Data SMS Send Check Procedure: 0 sec(s)
[2018.09.10 21:43:10]-[AppSend] Checking SMS Data Sending
[2018.09.10 21:43:10]-[AppSend] SMS Data Sending is Disabled
[2018.09.10 21:43:10]-[MODEM] Registered To Home Network
[2018.09.10 21:43:10]->> +CGREG: 1,"04E4","02F4"
[2018.09.10 21:43:10]-[ModeChange] Accelerometer selected as movement indicator
[2018.09.10 21:43:10]-[ModeChange] Accelerometer selected as movement indicator
[2018.09.10 21:43:11]-[ModeChange] Accelerometer selected as movement indicator
[2018.09.10 21:43:11]-[ModeChange] Nothing to change
[2018.09.10 21:43:12]-[AppSend] No sending procedure in 635 sec, configured period: 1 sec
[2018.09.10 21:43:12]-[OP.SEARCH] Operator black list is empty. Search on hold
[2018.09.10 21:43:14]-[OP.SEARCH] Wait for registration confirmation from CREG
[2018.09.10 21:43:14]-<< AT+COPS=0,2
[2018.09.10 21:43:14]->> ABORTED
[2018.09.10 21:43:17]-[SCHED] Simple Tacho debug: Already sent: false, is active: true.
[2018.09.10 21:43:17]-[SCHED] lvcan request
[2018.09.10 21:43:18]-[MODEM] Modem is Initializing (tmo:282)
[2018.09.10 21:43:19]-[MODEM] Registered To Home Network
[2018.09.10 21:43:19]->> +CGREG: 1,"04E4","0376"
[2018.09.10 21:43:22]-[AppSend] No sending procedure in 645 sec, configured period: 1 sec
[2018.09.10 21:43:22]- [MTX.WDG]->sr:0[1800] fl:0[1800] mod:0[1800] pr:175[1800] ds18:0[1800] lvcan:0[1800]
[2018.09.10 21:43:25]-[DEBUG]
UARTTxFullCnt: 0
SchTaskRunCnt: 10
UARTTskRunCnt: 989
AppSaveRunCnt: 10
AppSendRunCnt: 10
ValidNMEAPkts: 110
RS232 procesed: 0
RS232 droped : 0
RS485 procesed: 0
RS485 droped : 0
[2018.09.10 21:43:27]-[SCHED] Simple Tacho debug: Already sent: false, is active: true.
[2018.09.10 21:43:27]-[SCHED] DTC request
[2018.09.10 21:43:28]-[MODEM] Modem is Initializing (tmo:281)
[2018.09.10 21:43:28]-[AutoGeo] AutoGeofence is disabled
[2018.09.10 21:43:28]-[MODEM] Registered To Home Network
[2018.09.10 21:43:28]->> +CGREG: 1,"04E4","02F4"
[2018.09.10 21:43:29]-[OP.SEARCH] Wait for registration confirmation from CREG
[2018.09.10 21:43:29]-<< AT+COPS=0,2
[2018.09.10 21:43:29]-[DeepSleep] SLEEP MODE DISABLED!
[2018.09.10 21:43:32]-[AppSend] No sending procedure in 655 sec, configured period: 1 sec
[2018.09.10 21:43:35]-[MODEM] Modem is Initializing (tmo:280)
[2018.09.10 21:43:35]-[GPRS] Repeating task after delay
[2018.09.10 21:43:37]-[SCHED] Simple Tacho debug: Already sent: false, is active: true.
[2018.09.10 21:43:37]-[SCHED] lvcan request
[2018.09.10 21:43:38]-[MODEM] Modem is Initializing (tmo:279)
[2018.09.10 21:43:38]-[AppDatSav] Available
[2018.09.10 21:43:38]-[AppDatSav] 2930 seconds before periodic record save
[2018.09.10 21:43:38]-[MODEM] Registered To Home Network
[2018.09.10 21:43:38]->> +CGREG: 1,"04E4","0376"
[2018.09.10 21:43:42]-[AppSend] No sending procedure in 665 sec, configured period: 1 sec
[2018.09.10 21:43:44]- [MTX.WDG]->sr:0[1800] fl:0[1800] mod:0[1800] pr:196[1800] ds18:0[1800] lvcan:0[1800]
[2018.09.10 21:43:44]-[OP.SEARCH] Wait for registration confirmation from CREG
[2018.09.10 21:43:44]-<< AT+COPS=0,2
[2018.09.10 21:43:44]->> ABORTED
[2018.09.10 21:43:46]-[FWInfo]
FW version: 01.27.15.Rev.00
BL version: 01.10
Toolchain : 4.0.0524
Compiled : Oct 31 2017 @ 15:02:03
HW version: FM11YX_MOD2_A1:B2:C0:D0:E2:F0:G0:H0:I0:J0
HW voltage: 496 mV
[2018.09.10 21:43:46]-[PERIODIC.ONLINE.INFO]
Code Ver : 01.27.15.Rev:0
BL Version : 01.10
Hw Version : FM11YX_MOD2_A1:B2:C0:D0:E2:F0:G0:H0:I0:J0
Device IMEI : 357454073449991
Device IMSI : 206201006741536
Modem AppVer : 1.07.00
Modem FullVer : TM11Q_R_01.04.07.00_001
Reset Cause : Soft Reset
Startup Time : 2018/9/10 21:32:22
RTC Clock : 2018/9/10 21:43:46
GPS Clock : 2018/9/10 21:43:45
Device Uptime : 0:11:24
Sesion Upload : 0 Bytes
Total Upload : 0 Bytes
SMS Sent : 0
Received : 0
Restarts Made : 10
Errors Detected: 1
Records Sent : 0
BadRec Detected: 0
ProfCRC Fails : 0
Failed GPRS : 0
Failed Link : 0
UDP Link TMO : 0
No GPS Timer : 0:0:19
GPS Status : 3
Actual Sat : 16
Maximum Sat : 16
Last fix acqu : 1 sec (acquired)
Working Mode : 4 - Unknown on Stop
[2018.09.10 21:43:46]- [Ver]->01.27.15,0,357454073449991,Oct 31 2017,01.10,18,1.07.00,496,Descr:AXN_3.8_3333_16030100 Build:0000,,,,,
[2018.09.10 21:43:47]-[SCHED] Simple Tacho debug: Already sent: false, is active: true.
[2018.09.10 21:43:47]-[SCHED] lvcan request
[2018.09.10 21:43:47]-[MODEM] Registered To Home Network
[2018.09.10 21:43:47]->> +CGREG: 1,"04E4","02F4"
[2018.09.10 21:43:48]-[MODEM] Modem is Initializing (tmo:278)
[2018.09.10 21:43:52]-[AppSend] No sending procedure in 675 sec, configured period: 1 sec
[2018.09.10 21:43:56]-[ModeChange] Accelerometer selected as movement indicator
[2018.09.10 21:43:56]-[ModeChange] Accelerometer selected as movement indicator
[2018.09.10 21:43:57]-[SCHED] Simple Tacho debug: Already sent: false, is active: true.
[2018.09.10 21:43:57]-[ModeChange] Accelerometer selected as movement indicator
[2018.09.10 21:43:57]-[SCHED] lvcan request
[2018.09.10 21:43:57]-[ModeChange] Nothing to change
[2018.09.10 21:43:57]-[MODEM] Registered To Home Network
[2018.09.10 21:43:57]->> +CGREG: 1,"04E4","0376"
[2018.09.10 21:43:58]-[MODEM] Modem is Initializing (tmo:277)
[2018.09.10 21:43:59]-[OP.SEARCH] Wait for registration confirmation from CREG
[2018.09.10 21:43:59]-<< AT+COPS=0,2
[2018.09.10 21:44:02]-[AppSend] No sending procedure in 685 sec, configured period: 1 sec
[2018.09.10 21:44:05]- [MTX.WDG]->sr:0[1800] fl:0[1800] mod:5[1800] pr:217[1800] ds18:0[1800] lvcan:0[1800]
[2018.09.10 21:44:06]-[DEBUG]
UARTTxFullCnt: 0
SchTaskRunCnt: 10
UARTTskRunCnt: 991
AppSaveRunCnt: 10
AppSendRunCnt: 10
ValidNMEAPkts: 110
RS232 procesed: 0
RS232 droped : 0
RS485 procesed: 0
RS485 droped : 0
[2018.09.10 21:44:06]-[MODEM] Registered To Home Network
[2018.09.10 21:44:06]->> +CGREG: 1,"04E4","02F4"
[2018.09.10 21:44:07]-[SCHED] Simple Tacho debug: Already sent: false, is active: true.
[2018.09.10 21:44:07]-[SCHED] lvcan request
[2018.09.10 21:44:08]-[MODEM] Modem is Initializing (tmo:276)
[2018.09.10 21:44:08]-[Scheduler] GC is scheduled after: 0 sec
[2018.09.10 21:44:10]-[AppSend] Time left before Periodic Data SMS Send Check Procedure: 0 sec(s)
[2018.09.10 21:44:10]-[AppSend] Checking SMS Data Sending
[2018.09.10 21:44:10]-[AppSend] SMS Data Sending is Disabled
[2018.09.10 21:44:10]-[DTS] Creating Flash Job T
[2018.09.10 21:44:10]-[StackCheck] TaskId: 1 Name: FLSJOB Stack: 0x200053A0 Free: 1648/1720 @ TaskCreate
[2018.09.10 21:44:10]-[FLSJOB] Task created
[2018.09.10 21:44:10]-[DTS] tid: 0x0001, prio: 7, evt: 0x0008, dynamic Stack pnt: 200053a0
[2018.09.10 21:44:10]-[FLSJOB] Records garbage collector started
[2018.09.10 21:44:11]-[GC] Found records: 10, marked records found: 0
[2018.09.10 21:44:11]-[GC] Found 0 marked records
[2018.09.10 21:44:11]-[GC] Not enough records, next check after 120 min
[2018.09.10 21:44:11]-[GC] Marking blocks
[2018.09.10 21:44:12]-[GC] Counting Records
[2018.09.10 21:44:12]-[GC] 0 records deleted
[2018.09.10 21:44:12]-[FLSJOB] Done!
[2018.09.10 21:44:12]-[FLSJOB] Deleting self
[2018.09.10 21:44:12]-[AppSend] No sending procedure in 695 sec, configured period: 1 sec
[2018.09.10 21:44:12]-[OP.SEARCH] Operator black list is empty. Search on hold
[2018.09.10 21:44:14]-[OP.SEARCH] Wait for registration confirmation from CREG
[2018.09.10 21:44:14]-<< AT+COPS=0,2
[2018.09.10 21:44:14]->> ABORTED
-----------------------------------------------
Date: 10-9-2018 - 23:46:01
End log file
