Question

Hi,

I've read a lot about how to setup the different Sleeping modes, but still I have the doubt how I can ensure that my FMB920 will be active for a specific amount of time.

In a nutshell, I would like that when device wakes up, the active period before coming back to sleep is on the order of 2-3 minutes, as I need that new GPRS data session is established and if not, I require that my multi profile SIM card assigns the next identity 2 minutes later.

Which parameters (inside GPRS or Data acquisition sections) I must tune to get this? What I'm facing today is that under normal conditions data is sent successfully but in case of poor coverage / reconnections / roaming agreements conditions my tracker goes to sleep before those 2-3 minutes.

Thanks!

Alfredo

Comments

Hello.

Device will enter Sleep mode when all conditions to enter specified Sleep mode are met.

https://wiki.teltonika-gps.com/view/FMB920_Sleep_modes

Regards

Answer 1

Hello, 

Good day 

Here I am attaching the FMB920 sleep mode wiki link you can follow that. https://wiki.teltonika-gps.com/view/FMB920_Sleep_modes

if you have still issues, please reach out to us via VIP Helpdesk or contact your sales manager/distributor. If you don't have any contacts with our sales managers, please contact them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill out the form and submit it.

Note: as a topic, please choose "Vehicle telematics" or you can send an e-mail with the description of your situation to https://teltonika-iot-group.com/about-us/contacts/

Thank you for your understanding.

Kind regards.