WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

4167 questions

4739 answers

3460 comments

0 members

Most popular tags

fmb920 fmb120 configurator fmb640 sms-commands firmware fmb125 fmb001 configuration unlock-code fmb204 bluetooth canbus fmb140 fota-web fmc640 fmc130 firmware-upgrade fmb130 sms
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

27277: FMB640\641 send data of only manual can IO from CAN00 to CAN09. Data from CAN10 to CAN59 is ignored

0 votes
144 views
in Vehicle tracking by anonymous
Hi everyone,

even on FMB640 and FMB641 as well, data from CAN00 to CAN09 are correctly sent to server. Instead the datas from CAN10 until the last can are ignored. The messages are correctly managed by server ckecking crc. Do I miss anything in the configuration?

1 Answer

0 votes
by anonymous
Hello.

To read Manual Can elements higher than 9 (Manual CAN 10, Manual CAN 11.....), codec 8 Extended must be enabled, because those elements Ids are higher than 255, so they needs 2 bytes representation.

To enable Codec 8 Extended, go to System -> Protocol Settings -> Data Protocol in Teltonika configurator

Note, that your server must support codec 8 extended data.

Below, please find link with details:

https://wiki.teltonika-gps.com/view/Teltonika_Data_Sending_Protocols

Regards