Question

Hi,

I have some questions about the Teltonika FMB130 and FMB920 trackers                                                                                                  1° I made the data acquisition configuration of my FMB130 device as follows:

My doubts are:                                                                                                                                                                                                    - Will the device register information when any condition is satisfied (OR logic) or only when all conditions are satisfied (AND logic)?

2° In the Teltonika documents, it is possible to find the following information about the minimum angle for acquisition:

My question about the angle is the following:                                                                                                                                                    - To use this function, is it necessary to install the equipment in a specified position? Does the angle calculation depend on the orientation of the device?

Answer 1

Hello

Angle based data acquisition (Min Angle) – records are acquired when the angle difference between the last recorded coordinate and current position is greater than a defined value. Entering zero disables data acquisition based on the angle.

AD.1

 OR logic

AD.2

The angle value is given by GNSS

https://wiki.teltonika-gps.com/view/FMB920_Status_info#GNSS_Info

Best regards