Question

Hello,
I have noticed that the "Ignition On Counter" value gets reset to 7824 every time I update the configuration through FOTA WEB. I have also noticed the same happens for the "Total Odometer" value, where it gets reset to a much lower value. I would like to know a way to update the configuration through FOTA WEB without overwriting existing "Ignition On Counter" and "Total Odometer" values.

Thanks.

Answer 1

Hello.

Ignition on counter and total odometer resets to the value which is saved into configuration file as start value. You could set up those values with SMS or GPRS commands after update.

Any parameter can be changed with setparam command:

https://wiki.teltonika-gps.com/view/FMB920_SMS/GPRS_Commands

ignition on counter value parameter is 13501, total odometer value - 11807

for example to set odometer to 13000km, send: "sms_login sms_password setparam 11807 13000", or "  setparam 11807 13000" (two spaces in front) if no  sms login and password is set.

For odometer it could be also odoset command used