WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

4167 questions

4739 answers

3460 comments

0 members

Most popular tags

fmb920 fmb120 configurator fmb640 sms-commands firmware fmb125 fmb001 configuration unlock-code fmb204 bluetooth canbus fmb140 fota-web fmc640 fmc130 firmware-upgrade fmb130 sms
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

26384: PROBLEM WITH EYE BEACON/SENSOR WITH FMB920

0 votes
518 views
in Vehicle tracking by anonymous
Hello, i have a FMB920 and 1 Eye Beacon and 1 Eye Sensor.

I want for now use the Eye beacon like as driver identifier, if the Eye beacon is registered in the FMB920, it should to release the OUT1. I made a config using the feature ''imobollizer'' but its not working 100%, because the Eye sensor is releasing the OUT1, the pictures below are showing my config. My Eye beacon has the mac 7CD9F41A07F7 and the beacon list parameters are FFFFFFFF07809075868D55AAB22A3B20:3138:0055

How can i just set the Eye Beacon to release the out1?

Another question, what i can do with the Eye sensor? What parameters can i request from it and how?

1 Answer

0 votes
by anonymous
Hello

Please pay attention to how the immo scenario works

link

https://wiki.teltonika-gps.com/view/FMB920_Features_settings#Immobilizer

A movie may be of use

https://youtu.be/gjuiJjAejWU

If the device does not detect any defined Beacone and you turn on Ignition ( ignition source) => ON, DOUT1 prevents the engine from starting. (Sends to GND relay)

Then you move the  closer the Beacon to the device to turn off DOUT1 from the relay.

When activated, Beacon removes DOUT1 = GND from the relay - you can start the vehicle.

If the device detects a predefined Beacon before you activate Ignition ( ignition source) = ON - DOUT1 will not give GND to the relay and start the vehicle.

To properly set the distance of detection / activation of  EYE beacon via  device it  would require configuration of the operating range for communication via BLE 4.0- EYE =>Bluetooth 4.0=>Common Settings=> BT Power Level and beacon (EYE APP) - Power signal setings ( TX power)

Details

https://wiki.teltonika-gps.com/view/EYE_App_Configuration

Regarding EYE sensor

all information you can find here

https://wiki.teltonika-gps.com/view/EYE_SENSOR_/_BTSMP1

https://wiki.teltonika-gps.com/view/FMB920_Bluetooth_4.0_settings

Best regards
by anonymous
dude the problem is: why my EYE SENSOR is releasing the DOUT1 if i didnt add his ID in anywhere ?

I always understand who the process work, but not why the EYE SENSOR is releasing
by anonymous

Hello

We would like to analyze your case, therefore please open ticket in VIP Helpdesk and provide all needed information: device IMEI, firmware version, configuration file. If you don't have VIP Helpdesk login. please contact with your Sales Manager. If you don't have any contacts with our Sale managers, please contact with them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill the form and submit it. Note: as a topic, please choose "Vehicle telematics".
Or you can send an e-mail with description of your situation to info@teltonika.lt

Best Regards