Hi,
What is the sensor or device that you wanted to integrate with FMM125?
Please note that you need to consider the following for RS485 integration.
1. You need to select the right mode for RS485
Reference: FMM125 RS-232 and RS-485 - Wiki Knowledge Base | Teltonika GPS (teltonika-gps.com)
2. If you are using a sensor there is a specific BAUDRATE value, PARITY from the datasheet that you need to follow.
3. In case you were not able to get the received the data, use a TCP or UDP listener for testing.
4. Make sure your connection is correct.
Here is the pinout for FMM125
FMM125 First Start - Wiki Knowledge Base | Teltonika GPS (teltonika-gps.com)
Note for RS485 the connection should be
A to A
B to B
If your testing still didn't work, please create a VIP helpdesk ticket.
We would like to analyze your issue.
Please contact your sales manager. If you don't have any contacts with our Sale managers, please contact with them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill the form and submit it. Note: as a topic, please choose "Vehicle telematics". Or you can send an e-mail with description of your situation to info@teltonika.lt When contacting Us, please provide: IMEI/Logs/Configuration file/Intenational GSM number/Firmware version/ect, please follow these recommendations: https://wiki.teltonika-gps.com/view/Recommendations_for_filling_a_query_description
Best Regards,
Maynard C.