WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

4167 questions

4739 answers

3460 comments

0 members

Most popular tags

fmb920 fmb120 configurator fmb640 sms-commands firmware fmb125 fmb001 configuration unlock-code fmb204 bluetooth canbus fmb140 fota-web fmc640 fmc130 firmware-upgrade fmb130 sms
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

25950: FMC640 & CAN-Control over RS232

0 votes
257 views
in Vehicle tracking by anonymous
Hi Teltonika people,

I'm facing out to connect an FMC640 (latest firmware) with a CAN-Control module without any success.

Do You have any tip to let me know in order to make everything  working? CAN module is working but seems to be any RS232 connection with FMC640.

There is some particular setup to create? There is some pin to pin connection that diffears from the online schematics?

Thank You in advance

1 Answer

0 votes
by anonymous
Hello there,

Good day. Thank you for your question.

May I know if you have tried connecting the CAN-CONTROL using Mini-USB to FMC640? An example can be found here - https://wiki.teltonika-gps.com/view/FMC640_CAN_adapters#Installation_steps

Please check under the supported vehicle list if the vehicle you are testing is listed. https://wiki.teltonika-gps.com/view/CAN-CONTROL#Supported_vehicles_list

If your vehicle is on the list and you require the scheme, kindly reach out to us via VIP Helpdesk or contact your Sales Manager/Distributor as we do not share any schemes or files on the community forum. If you don't have any contacts with our Sales managers, please contact them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill out the form and submit it.

Note: as a topic, please choose "Vehicle Telematics" or you can send an e-mail with the description of your situation to info@teltonika.lt

Thank you in advance.

Kind regards.
by anonymous

Thank You for Your reply.

Unfortunately I've also tried to connect it via mini USB (and test the connection by SMS)  without success. The reply to the SMS command is : Prog0 SWDate:000000 SWRev:0 KernVer:0 Opt:0 ST:0x00 ID:0x0000000000000000.  

Can-Control module is correctly connected to the power connection (the LED blinks if device is resetted). I've also tried to switch RX and TX cables.

I'm also sure that the CAN-Control module is fully functional because it works if connected to an FMC130 tracker. Of couse the vehicle attempted to connect is on the list provided by Teltonika.

What else should I check?

Thank You in advance

by anonymous

Hello Rob, 

Thank you for your reply.

In this case, I would suggest that you reach out to our engineers for assistance via the VIP Helpdesk or contact your Sales Manager/Distributor so we can look into this matter and provide the best possible solution. If you don't have any contacts with our Sales managers, please contact them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill out the form and submit it.


Note: as a topic, please choose "Vehicle Telematics" or you can send an e-mail with the description of your situation to info@teltonika.lt

Thank you for your understanding.
Kind regards.