Question

how to configure din2 in fmc125 and how to connect it phisically??

Answer 1

Hello,

 

Thank you very much for contacting us.

 

For “How to connect it physically”: Ref.: FMC125 General description – Electrical characteristics – Input Voltage threshold (DIN2): “2.5 V” > 2.5 V is a sufficient external voltage to provide DIN 2’s state change.

 

For “How to configure DIN 2 in FMC125”: You need to configure “Digital Input 2” in the I/O settings accordingly. – Ref.: FMC125 Configuration – FMC125 I/O settings. Here;

• Operand On Exit can be used.
• High and Low Level can be set to “2.5” and “0”, respectively.
• With these settings, AVL ID 2 (Digital Input 2) will be “1” when Input Voltage Threshold of 2.5 V is exceeded, otherwise it will be “0”.

 

For further needs, questions or issues to be reviewed and solved, please contact your sales manager.

If you do not have any connection with our sales managers, please contact us via our official website:

• Go to https://teltonika-gps.com/,
• Click the "CONTACT US" button at the bottom right of the page,
• Fill the online form and submit it.

Note: Please select "Telematics" as the topic.

Alternatively, you can send an e-mail with a detailed description of your situation to info@teltonika.lt.

When contacting us, please follow these recommendations: https://wiki.teltonika-gps.com/view/Recommendations_for_filling_a_query_description

 

Best Regards,