FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

4167 questions

4739 answers

3460 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
520 views
in Vehicle tracking by anonymous

Hello,

i installed a FMB140 (with All-CAN config) with the CAN Lines to a DAF CF truck. I have set the CAN Program Number to 11465, saved config to device, load config to device and under "CAN Adapter -> Program number" i can see the 11465. Everything is working as expected.

Now i want to install it to a Fendt 828. Therefore i want to set the Program Number to 13148 or 12736 (for a Fendt 826). But if i do the above procedure, i always get the old Program Number. So the adapter is not accepting the new number. I also tried the Autoscan function, but it only shows one number, that seem to be incompatible.
I connected CAN1 to ISO Bus. I can also read the RPM of the engine. So communication is OK.

Does someone know, whats wrong?

In the Fendt tractor there is a ISO, K- and V- Bus. The FMB140 got 2 CAN interfaces. Can i connect CAN2 to K or V Bus to get more information?

I also wrote an email a week ago to info@teltonika.lt, but they didn't reply.
Thanks in advance.

by anonymous
The FMB140 has FW 03.27.07 Rev:00 / Configuration 8.14.0.0

1 Answer

+1 vote
by anonymous
Hello

I suppose your internal CAN adapter needs a SW update to be able to handle the newer Fendt programs

Please read the instructions on how to update  SW via Fota Web

https://wiki.teltonika-gps.com/view/CAN_Adapter_update

After update  please try to set up the necessary programs again.

Best regards
by anonymous
Thank you for your answer.

How can i register for FOTA web? i already tried before, but couldn't find a register button.

is there no way of a direct update with the configurator tool?
by anonymous
Hello

The SW update for FMB140 is only possible via Fota Web.

Please reach out to us via VIP Helpdesk or contact your sales manager/distributor. If you don't have any contacts with our Sales managers, please contact them on our official website https://teltonika-gps.com/ and click on the "Contact Us" button. When you will click, please fill out the form and submit it.

Note: as a topic, please choose "Vehicle telematics" or you can send an e-mail with the description of your situation to https://teltonika-iot-group.com/about-us/contacts/

Best regards
by anonymous
Ok, i contacted via Web form.

How can i differentiate between ALL-CAN and LVCAN version of the FMB140 (except from the package product number)?
by anonymous

You can send the command SMS/GPRS 

  lvcangetinfo

If you find in the answer

SWVer: 73 Opt: A  - this is LVCAN mode

SWVer: 73 Opt: 3F- this is  ALLCAN mode

Best regards