FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE
Ask a question

3844 questions

4380 answers

3252 comments

46077 members

Ask a question
0 votes
213 views
in Vehicle tracking by

How do I remove Immobilisation via SMS when DOUT1 Scenario is enabled for Immobilisation (FMC125)? - The immobilisation Scenario is enabled for DOUT1 and works fine with Dallas Reader and Relay. When sending the SMS command <  setdigout 0> to switch the DIGOUT1 value from 1 to 0, so that there will be continuity between 87a and 30 allowing override of the scenario and permitting the vehicle to be started. I.e When Ignition is off, DOUT1 value = 0. When Ignition is on, DOUT1 value = 1. When Ignition is on AND the Dallas is presented, value = 0. How can I change the output to override the immobilisation if, for example, the Driver lost his Dallas Fob, or the Dallas Reader got damaged? The goal is to not have the Driver stranded when out on a job.

1 Answer

+2 votes
by

Hello

Just send an SMS / GPRS command

setparam 11702:0

which will turn off the DOUT1 connected to the relay

or

setparam 11700:0

which disable the Immobilizer scenario

I hope that will helpfully

https://wiki.teltonika-gps.com/view/FMB125_Features_settings#Immobilizer

BR

Best answer
by
Excellent. It works perfectly. Thank you BR.
by
Hi,

I have the same scenario, I want to disable the DOUT1 with SMS in case the driver forgot his key, but I would like to disable it only for 1 time, the next time the vehicle starts it should set activate the immobilizer again and set the DOUT1 to ON, how is that possible.

I try to set back the DOUT1 with setparam 11702:1, it did not work.

Thanks